#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 0.0.0.1-0.255.255.255	# RFC 1122 "this" network (LAN)
acl localnet src 10.0.0.0/8		# RFC 1918 local private network (LAN)
acl localnet src 100.64.0.0/10		# RFC 6598 shared address space (CGN)
acl localnet src 169.254.0.0/16 	# RFC 3927 link-local (directly plugged) machines
acl localnet src 172.16.0.0/12		# RFC 1918 local private network (LAN)
acl localnet src 192.168.0.0/16		# RFC 1918 local private network (LAN)
acl localnet src fc00::/7       	# RFC 4193 local private network range
acl localnet src fe80::/10      	# RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80		# http
acl Safe_ports port 21		# ftp
acl Safe_ports port 443		# https
acl Safe_ports port 70		# gopher
acl Safe_ports port 210		# wais
acl Safe_ports port 1025-65535	# unregistered ports
acl Safe_ports port 280		# http-mgmt
acl Safe_ports port 488		# gss-http
acl Safe_ports port 591		# filemaker
acl Safe_ports port 777		# multiling http
acl CONNECT method CONNECT

#GITHUB upload blocking work start
acl GITHUB dstdomain github.com
acl  POST method POST
acl  PUT method PUT
acl  DELETE method DELETE
acl  OPTIONS method OPTIONS
acl  TRACE method TRACE
acl  PATCH method PATCH

http_access deny POST GITHUB
http_access deny PUT GITHUB
http_access deny DELETE GITHUB
http_access deny OPTIONS GITHUB
http_access deny TRACE GITHUB
http_access deny PATCH GITHUB
#GITHUB upload blocking work end


#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128. ssl-bump configuration
http_port 3128 ssl-bump generate-host-certificates=on cert=/usr/local/squid/etc/ssl/cacrt.pem key=/usr/local/squid/etc/ssl/cakey.pem dynamic_cert_mem_cache_size=4MB options=NO_SSLv3,NO_TLSv1,NO_TLSv1_1,SINGLE_DH_USE,SINGLE_ECDH_USE cipher=HIGH:MEDIUM:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS tls-dh=prime256v1:/usr/local/squid/etc/ssl/dhparam.pem

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /usr/local/squid/var/cache/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /usr/local/squid/var/cache/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp:		1440	20%	10080
refresh_pattern ^gopher:	1440	0%	1440
refresh_pattern -i (/cgi-bin/|\?) 0	0%	0
refresh_pattern .		0	20%	4320


# Custom config SSL-MITM mode
tls_outgoing_options options=NO_SSLv3,NO_TLSv1,NO_TLSv1_1,SINGLE_DH_USE,SINGLE_ECDH_USE cipher=HIGH:MEDIUM:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS

sslcrtd_program /usr/local/squid/libexec/security_file_certgen -s /usr/local/squid/var/lib/ssl_db -M 4MB

acl step1 at_step SslBump1
ssl_bump peek step1
ssl_bump bump all